What is Brio Start Stop Engine Oil Additive Mos2?

Increases lubrication in the engines that are frequently starting and stopping. Due to its protective and sticky MoS2 layer, it provides direct protection when the cold engine is started. Minimizes friction resistance, protects against corrosion, prevents oil sedimentation, prevents oil passages from clogging. It also neutralizes aggressive combustion acids and regenerates the used engine oil active substances. Dissolves resins covering the piston rings. It can be added to engine oil after engine repairs and oil changes. It can also be used to fulfill the reduced engine oil.

Where to Use?

Suitable for the engine types that starts and stops frequently such as start-stop type engines.

How to Use Start Stop Engine Oil Additive Mos2?

Add a bottle of Brio Start Stop Engine Oil Additive to the engine oil of your vehicle preferably after changing the engine oil. It can also be used to complete the engine oil. After the application, test drive the vehicle for 15 minutes for maximum efficiency. Make sure vehicles engine oil does not exceed the maximum oil level. One bottle of additive mixes up to 4 - 6 litres of engine oil. The recommended replacement of oil additive is once in every 20,000 km.

Attention

Use gloves before application. Avoid contact with skin and eyes. Apply in well-ventilated areas. Store the product in a cool and dry place.  Keep out of freezing, direct sunlight and temperatures above 50°C. Keep out of reach of children.

Origin of Product

Europe