Chemical Anchor is developed for hard or hollow surfaces such as concrete, stone, brick . It is a two component, enhanced polyester resin based, easily applicable, fast drying, high strength product. It is thixotropic, does not sag and does not fall, is an ideal product for horizontal and vertical applications. Fields of Application: Used as a chemical anchor in concrete and brick walls, in dowel bar placement, in anchorages that are exposed to heavyweight and for mounting applications. Instructions for Use: Use gloves before application. Avoid contact with skin and eyes. Apply in well-ventilated areas. Do not breathe its vapour. Open the cap at the top of the cartridge. Place mixing nozzle to the cartridge and screw it tightly. Place the cartridge into application gun. Extrude the product by 10 cm to ensure the mixing is homogenous. Inject anchor to fill 2/3 of the hole and place the anchoring bar into the application area. Store the product in a cool and dry place. Keep out of freezing, direct sunlight and temperatures above 50°C. Keep out of reach of children.